TPS92630QPWPRQ1 izibane ze-LED abaqhubi be-LED amaShaneli amathathu Linear LED Dvr w/ Analog
♠ Inkcazo yeMveliso
| Uphawu lweMveliso | Ixabiso lophawu |
| Umenzi: | Texas Instruments |
| Udidi lweMveliso: | Abaqhubi bokuKhanya kwe-LED |
| RoHS: | Iinkcukacha |
| Uthotho: | TPS92630-Q1 |
| Isimbo sokuNqamisa: | SMD/SMT |
| Umqulu / Ityala: | I-HTSSOP-16 |
| Inani leZiphumo: | 3 Isiphumo |
| Imveliso yangoku: | 150 mA |
| Igalelo loMbane, uMz: | 5 V |
| Igalelo lombane, Ubukhulu: | 40 V |
| I-Topology: | Khuthaza, Buck |
| Izakhelo zokuSebenza: | - |
| Umbane ophumayo: | 4 V ukuya ku-75 V |
| Ubuncinci bobushushu bokusebenza: | - 40 C |
| Obona bushushu bokusebenza: | + 125 C |
| Isiqinisekiso: | I-AEC-Q100 |
| Ukupakishwa: | I-Reel |
| Ukupakishwa: | Sika iTape |
| Ukupakishwa: | MouseReel |
| Iimbonakalo: | I-PWM Dimming, Vula uKhuseleko lwe-LED |
| Uphawu: | Texas Instruments |
| Igalelo lamandla ombane: | 5 V ukuya ku-40 V |
| Ukungevani kukufuma: | Ewe |
| Inani lamatshaneli: | 3 Umjelo |
| Uluhlu lobushushu obusebenzayo: | - 40 C ukuya + 125 C |
| Uhlobo Lwemveliso: | Ngoku rhoqo |
| Imveliso: | Abaqhubi be-LED |
| Uhlobo lweMveliso: | Abaqhubi bokuKhanya kwe-LED |
| Ubungakanani bePakethi yoMzi-mveliso: | 2000 |
| Uluhlu olungaphantsi: | Ii-ICs zomqhubi |
| Unikezelo lwangoku - Ubuninzi: | 850 uA |
| Uhlobo: | Umgca we-LED Driver |
| Ubunzima beyunithi: | 0.003104 oz |
♠ TPS92630-Q1 Ijelo elinemijelo emithathu yoMqhubi we-LED ene-Analog kunye ne-PWM Dimming
Isixhobo se-TPS92630-Q1 sisixhobo esinemigca emithathu yomqhubi we-LED ene-analog kunye ne-PWM yokulawula ubumnyama. Izakhono zayo zokuxilonga ngokupheleleyo kunye nezakhelwe ngaphakathi zokukhusela zikwenza kube yinto efanelekileyo yokukhetha ukukhanya kwe-LED eguquguqukayo kwizicelo zokukhanya kwe-LED ukuya kuluhlu lwamandla aphakathi.
• Ufanelekile kwizicelo zeMoto
• I-AEC-Q100 Ifanelekile Ngezi Ziphumo zilandelayo:
– Ubushushu beSixhobo kwiBanga loku-1: -40°C ukuya kwi-125°C i-Ambient Operating Range
–Isixhobo seHBM ESD Classification Level H2
– Isixhobo CDM ESD Classification Level C3B
• 3-Ch. Umqhubi we-LED Nge-Analog kunye ne-PWM Dimming
• Uluhlu oluBanzi lwe-Input-Voltage: 5 V–40 V
• Uhlengahlengiso lwesiphumo sangoku esiSetyiswe yiReference Resistor
– Max. Okwangoku: 150 mA ngeChaneli nganye
– Max. Okwangoku: 450 mA kwiNdlela yokuSebenza eParallel
– Ukuchaneka: ±1.5% ngeChaneli nganye Xa ndi(IOUTx)>30 mA
– Ukuchaneka: ±2.5% ngeDivaysi nganye Xa ndi(IOUTx)>30 mA
• Iziphumo ezinxuseneyo ngokuPhezulu ngokuSebenzisa ii-ICs ezininzi okanye iiChaneli ezininzi ze-IC enye
• Amandla ombane ophumayo asezantsi
– Max. Ukuyeka: 400 mV kwi-60 mA ngeChaneli nganye
– Max. Ukuyeka: 0.9 V kwi-150 mA ngeChannel nganye
• I-Dimming ye-PWM eZimeleyo ngeChaneli nganye
• Vula kunye nokuFutshaniswa kwe-LED nge-Deglitch Timer
• I-LED-String Voltage Feedback ngeChaneli nganye yokuFumana i-Single-LED emfutshane
• Yahlula iFault Pin ye-Single-LED Short Short Failure
Izicelo zokuKhanya ze-LED zeMoto, ezifana ne:
• Isibane esibaleka emini
• Isikhundla sokuKhanya
• Ukukhanya kwenkungu
• Isibane esingasemva
• Misa okanye iTaillight
• Izibane zangaphakathi
