STM32F205VGT6 ARM Microcontrollers – MCU 32BIT ARM Cortex M3 uQhagamsheleko 1024kB
♠ Inkcazo yeMveliso
| Uphawu lweMveliso | Ixabiso lophawu |
| Umenzi: | I-STMicroelectronics |
| Udidi lweMveliso: | I-ARM Microcontrollers-MCU |
| Uthotho: | I-STM32F205VG |
| Isimbo sokuNqamisa: | SMD/SMT |
| Umqulu / Ityala: | LQFP-100 |
| Undoqo: | I-ARM Cortex M3 |
| Ubungakanani beMemori yeNkqubo: | 1 MB |
| Ububanzi bebhasi yeDatha: | 32 bit |
| Isisombululo se-ADC: | 12 bit |
| Ubuninzi bewotshi yokuphindaphinda: | 120 MHz |
| Inani le-I/Os: | 82 I/O |
| Idatha ye-RAM Ubungakanani: | 132 kB |
| Supply Voltage - Min: | 1.8 V |
| Ubonelelo lweVoltage-Max: | 3.6 V |
| Ubuncinci bobushushu bokusebenza: | - 40 C |
| Obona bushushu bokusebenza: | + 85 C |
| Ukupakishwa: | Itreyi |
| Uphawu: | I-STMicroelectronics |
| Uhlobo lwe-RAM yeDatha: | SRAM |
| Idatha yeROM ubukhulu: | 512 B |
| NONE | 2xCAN, 2xUART, 3xI2C, 3xSPI, 4xUSART, SDIO |
| Ukungevani kukufuma: | Ewe |
| Inani lezibali-xesha/izixhobo zokubala: | 10 Isibali-xesha |
| Uthotho lweProsesa: | I-ARM Cortex M |
| Uhlobo lweMveliso: | I-ARM Microcontrollers-MCU |
| Uhlobo lweMemori yeNkqubo: | Flash |
| Ubungakanani bePakethi yoMzi-mveliso: | 540 |
| Uluhlu olungaphantsi: | Microcontrollers - MCU |
| Igama loRhwebo: | I-STM32 |
| Ubunzima beyunithi: | 0.046530 oz |
• Undoqo: I-Arm® 32-bit Cortex®-M3 CPU (120 MHz max) ene-Adaptive real-time accelerator (ART Accelerator™) evumela ukuphunyezwa kwemeko eyi-0 kwimemori yeFlash, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
• Iinkumbulo
Ukuya kuthi ga kwi-1 Mbyte yememori yeFlash
-I-512 bytes yememori ye-OTP
Ukuya kuthi ga kwi-128 + 4 Kbytes ye-SRAM
-Isilawuli sememori esiguquguqukayo esixhasa iCompact Flash, SRAM, PSRAM, NOR kunye neenkumbulo zeNAND
-I-LCD ujongano oluhambelanayo, iindlela ze-8080/6800
• Ulawulo lwewotshi, ukusetha ngokutsha kunye nokubonelela
– Ukususela kwi-1.8 ukuya kwi-3.6 V isicelo sobonelelo + I / Os
-I-POR, i-PDR, i-PVD kunye ne-BOR
– 4 ukuba 26 MHz crystal oscillator
-Yangaphakathi 16 MHz ifektri-elungiswe RC
– 32 kHz oscillator ye-RTC enolungelelwaniso
– Ngaphakathi 32 kHz RC ngolungelelwaniso
• Iimowudi zamandla aphantsi
-Lala, Misa kunye neendlela zokulinda
-Ubonelelo lwe-VBAT lwe-RTC, iirejista ezingama-20 × 32 bit, kunye ne-4 Kbytes eyimfihlo ye-SRAM.
• 3 × 12-bit, 0.5 µs ADCs ukuya kuthi ga kwiitshaneli ezingama-24 kunye nokuya kuthi ga kwi-6 MSPS kwimowudi engenelele kathathu
• 2 × 12-bit D/A converters
• Injongo ye-DMA ngokubanzi: isilawuli se-16-stream kunye ne-FIFOs esembindini kunye nenkxaso eqhumayo
• Ukuya kuthi ga kwi-17 lamaxesha
Ukuya kuthi ga kwishumi elinesibini le-16-bit kunye nezimbini ze-32-bit timer, ukuya kuthi ga kwi-120 MHz, nganye ifikelela kwi-IC/OC/PWM ezine okanye i-pulse counter kunye ne-quadrature (eyongezelelweyo) igalelo leencoder
• Imowudi yolungiso: Uthotho locingo olulungisiweyo (SWD), JTAG, kunye neCortex®-M3 Embedded Trace Trace Macrocell™
• Ukuya kuthi ga kwi-140 I/O kumazibuko anamandla okuphazamiseka:
– Ukuya kuthi ga kwi-136 ngokukhawuleza I/Os ukuya kuthi ga kwi-60 MHz
– Ukuya kuthi ga 138 5 V-ukunyamezela I/Os
• Ukuya kuthi ga kwi-15 ujongano lonxibelelwano
Ukuya kuthi ga kwiindlela ezintathu ze-I2C (SMBus/PMBus)
Ukuya kuthi ga kwii-USART ezine kunye nee-UART ezimbini (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA,
ulawulo lwemodem)
Ukuya kuthi ga kwiiSPI ezintathu (30 Mbit / s), ezimbini ezine-I2S exutywe ukufezekisa ukuchaneka kweklasi yeaudio nge-PLL yomsindo okanye i-PLL yangaphandle
– 2 × ujongano lwe-CAN (2.0B Iyasebenza)
-Ujongano lwe-SDIO
• Uqhagamshelwano oluphezulu
– Isixhobo se-USB 2.0 esigcwele isantya/inginginya/ isilawuli se-OTG esine-PHY ekwichip
-I-USB 2.0 isantya esiphezulu/isixhobo esipheleleyo/i-host/ isilawuli se-OTG esine-DMA ezinikeleyo, kwi-chip egcwele isantya se-PHY kunye ne-ULPI
- 10/100 Ethernet MAC ene-DMA ezinikeleyo: ixhasa i-IEEE 1588v2 hardware, MII/RMII
• I-8- ukuya kwi-14-bit ujongano lwekhamera enxuseneyo (48 Mbyte/s max.)
• Iyunithi yokubala ye-CRC
• 96 bit unique ID
