AT91SAM7S256D-AU ARM Microcontrollers MCU 256K Flash SRAM 64K ARM esekwe MCU
♠ Inkcazo yeMveliso
Uphawu lweMveliso | Ixabiso lophawu |
Umenzi: | Microchip |
Udidi lweMveliso: | I-ARM Microcontrollers-MCU |
RoHS: | Iinkcukacha |
Uthotho: | SAM7S/SE |
Isimbo sokuNqamisa: | SMD/SMT |
Umqulu / Ityala: | I-LQFP-64 |
Undoqo: | ARM7TDMI |
Ubungakanani beMemori yeNkqubo: | 256 kB |
Ububanzi bebhasi yeDatha: | 32 bit/16 bit |
Isisombululo se-ADC: | 10 bit |
Ubuninzi bewotshi yokuphindaphinda: | 55 MHz |
Inani le-I/Os: | 32 I/O |
Idatha ye-RAM Ubungakanani: | 64 kB |
Supply Voltage - Min: | 1.65 V |
Ubonelelo lweVoltage-Max: | 1.95 V |
Ubuncinci bobushushu bokusebenza: | - 40 C |
Obona bushushu bokusebenza: | + 85 C |
Ukupakishwa: | Itreyi |
I-Analog Supply Voltage: | 3.3 V |
Uphawu: | Microchip Technology / Atmel |
Uhlobo lwe-RAM yeDatha: | i-ram |
Ubude: | 1.6 mm |
I/O Voltage: | 1.65 V ukuya ku-3,6 V |
NONE | I2C, SPI, USART, USB |
Ubude: | 7 mm |
Ukungevani kukufuma: | Ewe |
Inani lamatshaneli e-ADC: | 8 Ijelo |
Inani lezibali-xesha/izixhobo zokubala: | 3 Isibali-xesha |
Uthotho lweProsesa: | I-SAM7S |
Imveliso: | MCU |
Uhlobo lweMveliso: | I-ARM Microcontrollers-MCU |
Uhlobo lweMemori yeNkqubo: | Flash |
Ubungakanani bePakethi yoMzi-mveliso: | 160 |
Uluhlu olungaphantsi: | Microcontrollers - MCU |
Izibali Zexesha: | Isibali-xesha seWatchdog |
Ububanzi: | 7 mm |
Ubunzima beyunithi: | 0.012088 oz |
♠ AT91SAM ARM-based Flash MCU
I-SAM7S ye-Atmel luluhlu lwe-pincount ephantsi ye-Flash microcontrollers esekwe kwiprosesa ye-ARM ye-32-bit ye-RISC.Ibonisa iFlash enesantya esiphezulu kunye ne-SRAM, iseti enkulu yeeperipherals, kubandakanya isixhobo se-USB 2.0 (ngaphandle kwesixhoboSAM7S32 kunye ne-SAM7S16), kunye nesethi epheleleyo yemisebenzi yenkqubo yokunciphisa inani lamacandelo angaphandle.
Isixhobo siyindlela efanelekileyo yokufuduka kubasebenzisi be-8-bit microcontroller abafuna ukusebenza okongeziweyo kunyeinkumbulo eyandisiweyo.Imemori yeFlash elungisiweyo inokucwangciswa ngaphakathi kwinkqubo ngeJTAG-ICE ujongano okanye ngokujongana nojongano olunxuseneyokwiprogram yemveliso phambi kokunyuka.Amasuntswana okutshixa okwakhelwe ngaphakathi kunye nentwana yokhuseleko ikhusela i-firmware ekubhaleni ngaphezulu ngempazamo kwaye igcina imfihlo yayo.
Umlawuli wenkqubo ye-SAM7S Series uquka umlawuli wokusetha kwakhona okwazi ukulawula ukulandelelana kwamandla ngokulandelelanai-microcontroller kunye nenkqubo epheleleyo.Ukusebenza kwesixhobo esichanekileyo kunokujongwa yi-brownout eyakhelwe-ngaphakathii-detector kunye ne-watchdog eqhuba i-oscillator ye-RC edibeneyo.
I-SAM7S Series zi-microcontrollers zenjongo jikelele.Izibuko zabo ezidityanisiweyo zeSixhobo se-USB zibenza zibe zizixhobo ezifanelekileyokwiiaplikeshini zeperipheral ezifuna uqhagamshelo kwiPC okanye kwiselfowuni.Ixabiso labo elinobundlobongela kunye nenqanaba eliphezulu leindibaniselwano ityhala umda wabo wokusetyenziswa kude kwimalike yabathengi engabizi kakhulu, enomthamo ophezulu.
• Ibandakanya i-ARM7TDMI® ARM® Thumb® Processor
-Ukusebenza okuphezulu kwe-32-bit ye-RISC Architecture
– Uxinaniso oluphezulu lwe-16-bit Iseti yoMyalelo
-Inkokeli kwi-MIPS/Watt
-I-EmbeddedICE ™ Ukulinganisa kwiSekethe, iNkxaso yeSitishi soNxibelelwano lwe-Debug
• I-Flash-speed yangaphakathi
– 512 Kbytes (SAM7S512) Ilungelelaniswe kwiiBhanki ezimbini eziQhelekileyo ze-1024 Amaphepha angama-256I-Bytes (Iinqwelo-moya ezimbini)
– 256 Kbytes (SAM7S256) Iququzelelwe ngamaPhepha angama-1024 eByte ezingama-256 (Inqwelomoya enye)
– 128 Kbytes (SAM7S128) Iququzelelwe ngamaPhepha angama-512 eByte ezingama-256 (Inqwelomoya enye)
– 64 Kbytes (SAM7S64) Ulungelelaniswe kumaphepha angama-512 eByte ezili-128 (Inqwelomoya enye)
– 32 Kbytes (SAM7S321/32) Iququzelelwe ngaMaphepha angama-256 eByte ezili-128 (Inqwelomoya enye)
– 16 Kbytes (SAM7S161/16) Iququzelelwe kumaphepha angama-256 eByte ezingama-64 (Inqwelomoya enye)
-UFikelelo lomjikelo omnye ukuya kuthi ga kwi-30 MHz kwezona meko zimbi kakhulu
–I-Prefetch Buffer UPhumeza uMyalelo woThupha ngesantya esiphezulu
– Ixesha lokuCwangcisa iPhepha: 6 ms, Kubandakanya ukucinywa ngokuzenzekelayo kwePhepha, ixesha lokuCima ngokupheleleyo: 15 ms
-I-10,000 yokuBhala imijikelo, iminyaka eli-10 yokuGcina iDatha, ubuKhona bokutshixa iCandelo, iFlashUkhuseleko Bit
-I-Flash Programming Interface ekhawulezayo yeMveliso yoMqulu oPhezulu
• Isantya esiphezulu se-SRAM sangaphakathi, ukufikelela kumjikelo omnye ngesantya esiphezulu
– 64 Kbytes (SAM7S512/256)
– 32 Kbytes (SAM7S128)
– 16 Kbytes (SAM7S64)
– 8 Kbytes (SAM7S321/32)
– 4 Kbytes (SAM7S161/16)
• UMlawuli weMemori (MC)
-IsiLawuli seFlash esiNgenelweyo, iSimo sokuLahla kunye nokuFumana ngokungalunganga
• Seta ngokutsha isiLawuli (RSTC)
– Ngokusekwe kwi-Power-on Reset kunye ne-low-power Factory-calibrated Brown-out Detector
– Ibonelela ngokuBuyiselwa kwakhona kwangaphandle koMqondiso kunye nokuSeta kwakhona ubume boMthombo
• Umvelisi wewotshi (CKGR)
-I-oscillator ye-RC enamandla aphantsi, i-3 ukuya kwi-20 MHz kwi-Oscillator ye-chip kunye ne-PLL enye
• UMlawuli woLawulo lwaMandla (PMC)
-IzaKhono zokuSebenza koMbane weSoftware, kubandakanywa iMowudi ecothayo (ezantsi ukuya kuma-500Hz) kunye neMowudi yokungasebenzi
– IiMpawu eziThathu ezicwangcisekileyo zewotshi yangaphandle
• IsiLawuli soPhakamiso oluNqobileyo (AIC)
-Ngomntu ngamnye oMaskable, iNqanaba eliPhambili kwiNqanaba eliSibhozo, iMithombo yoPhakamisa eVectored
– Ezimbini (SAM7S512/256/128/64/321/161) okanye iNye (SAM7S32/16) Imvelaphi yoPhakamiso lwaNgaphandlekunye noMthombo omnye oKhawulezayo oPhakamisayo, uPhakamisa oBubuxoki oKhuselweyo
• iYunithi yokulungisa ingxaki (DBGU)
-I-2-wire ye-UART kunye neNkxaso yoNxibelelwano loNxibelelwano lwe-Debug luphazamise, iProgrammable ICE Access Prevention
– Imowudi yeNjongo ngokubanzi 2-ngocingo UART Unxibelelwano lothotho
• Isibali-xesha seXesha leThutyana (PIT)
–I-20-bit Programmable Counter kunye ne-12-bit Interval Counter
• Windowed Watchdog (WDT)
– I-12-bit key-ekhuselweyo i-Programmable Counter
-Ibonelela ngokuSeta kwakhona okanye iZibonakalisi zokuphazamiseka kwiNkqubo
-Ikhawuntara inokuyekwa ngelixa iProsesa ikwimeko ye-Debug okanye ikwiMowudi engasebenziyo
• Isibali-xesha sangempela (RTT)
-I-32-bit ye-Counter esebenzayo yasimahla eneAlam
-Ibaleka kwi-Oscillator ye-RC yangaphakathi
• IsiLawuli seNgeniso esiNye esiFanayo/Iimveliso (PIOA)
– Amashumi amathathu anesibini (SAM7S512/256/128/64/321/161) okanye amashumi amabini ananye (SAM7S32/16) I/O Lines Programmable Multiplexed ukuya kuthi gaIi-Peripheral I/Os ezimbini
– Igalelo lokuPhakamisa ukuKhabaza kwiNdlela nganye ye-I/O
-Ngomntu ngamnye Programmable Open-drain, ukutsalwa-up resistor kunye Isiphumo Synchronous
• Ishumi elinanye (SAM7S512/256/128/64/321/161) okanye eliThoba (SAM7S32/16) Imijelo yoLawulo lweDMA yoMda (PDC)
• I-USB enye 2.0 Isantya esigcweleyo (i-12 Mbits ngeSekondi) iPort yesixhobo (Ngaphandle kwe-SAM7S32/16).
-I-On-chip Transceiver, 328-byte Configurable Integrated Integrated FIFOs
• IsiLawuli sothotho esiSetyenzisiweyo esinye (SSC)
-Iwotshi eZimeleyo kunye neSakhelo soLungelelaniso lweSakhelo kuMmkeli ngamnye kunye noThumelo
–I-I²S yeNkxaso yoNxibelelwano lwe-Analog, iCandelo leXesha leNkxaso ye-Multiplex
– Isantya esiphezulu iSpeed Continuous Data Stream Capabilities kunye ne-32-bit Data Transfer
• Ezimbini (SAM7S512/256/128/64/321/161) okanye iNye (SAM7S32/16) ii-Universal Synchronous/Asynchronous Receiver Transmitters(USART)
-Umntu ngamnye we-Baud Rate Generator, i-IrDA® i-Infrared Modulation/Demodulation
– Inkxaso ISO7816 T0/T1 Smart Card, Hardware Handshaking, RS485 Inkxaso
-Inkxaso yomgca weModem epheleleyo kwi-USART1 (SAM7S512/256/128/64/321/161)
• I-One Master/Slave Series peripheral Interface (SPI)
-I-8- ukuya kwi-16-bit yoBubude beDatha obuLungiselelayo, iZine eziKhethekileyo zePeripheral Chip
• Isibali-xesha esine-16-bit ye-16-bit (TC)
–Izikhonkwane eziNtathu zaNgaphandle zekloko kunye nezikhonkwane ezimbini ze-I/O ezineenjongo ezininzi ngeChaneli nganye (SAM7S512/256/128/64/321/161)
-Igalelo elinye leClock yangaphandle kunye neZikhonkwane ezimbini ze-I/O ezineenjongo ezininzi kwiiChaneli ezimbini zokuqala kuphela (SAM7S32/16)
-IsiZukulwana se-PWM ephindwe kabini, iNdlela yokuThatha/iMaza, iSakhono esiPhezulu/ezantsi
• Isilawuli se-PWM esine-16-bit ye-PWM enye (i-PWMC)
• I-One-Twi-wire Interface (TWI)
-INkxaso yeMowudi ye-Master kuphela, Zonke ii-EEPROM ezineentambo ezimbini ze-Atmel kunye ne-I2C Izixhobo ezihambelanayo ezixhaswayo(SAM7S512/256/128/64/321/32)
-I-Master, i-Multi-Master kunye neNkxaso yeMowudi yekhoboka, zonke ii-EEPROM ezineentambo ezimbini kunye ne-I2C Izixhobo ezihambelanayo ezixhaswayo(SAM7S161/16)
• Itshaneli enye ye-8-bit ye-Analog-to-Digital Converter, Imijelo eZine eziPhilliswe ngeDigital I/Os
• UMncedisi we-SAM-BA™ Boot
– Inkqubo yokuQalisa eMiselweyo
–IsiNxulumanisi esine-SAM-BA yoMsebenzi weMizobo yoMsebenzi
• IEEE® 1149.1 JTAG Iskena seMda kuzo zonke iiPini zeDijithali
• Ii-I/Os ezikwaziyo ukunyamezela i-5V, kuquka imigca emine ye-High-current Drive I/O, Ukuya kuthi ga kwi-16 mA nganye (SAM7S161/16 I/Os Ayina-5V-ukunyamezela)
• Ubonelelo ngoMbane
-I-1.8V i-Regulator efakwe kwi-1.8V, Ukuzoba ukuya kuthi ga kwi-100 mA kwiNqanaba kunye naMacandelo angaphandle
– 3.3V okanye 1.8V VDDIO I/O Lines Power Supply, Independent 3.3V VDDFLASH Flash Power Supply
– 1.8V VDDCORE Core Power Supply with Brown-out Detector
• Ukusebenza okuNxibele ngokupheleleyo: Ukuya kuthi ga kwi-55 MHz kwi-1.65V kunye ne-85°C yeeMeko eziMbi kakhulu
• Ifumaneka kwi-64-lead LQFP Green okanye 64-pad QFN Green Package (SAM7S512/256/128/64/321/161) kunye 48-lead LQFP Green okanye48-pad QFN Green Package (SAM7S32/16)